Chrysler Repair: 1993 Plymouth Grand Ignition Switch, postal mail, column release

Question
How do I remove the Ignition Switch from a 1993 Plymouth Grand Vorager SE.

Any web sites the show steps?

Answer
Hi Loyd,
Here is summary of how to do it. There are some figures that I can't post so if you need those I would need to xerox and postal mail. I don't know of a web site.
Disconnect the battery
Remove the tilt lever
Remove the upper and lower steering column covers
Put the ignition switch in park
Remove the screws from the switch(torx 15 or 20)
Pull switch away from column
Release tab locks on the connectors, then remove connectors
Install is the reverse
Be sure the flag on the new switch is parallel to the connector and the park lock dowl pin is properly indexed
Put a light coat of grease on the lock pin and the flag
Make sure it all meshes together when you install the switch
Roland