Chrysler Repair: 98 Sebring alternator replacement, pivot bolt, torque specifications

Question
hi Roland,

im trying to replace the alternator on my 1998 sebring coupe 2.5L, but can not figure out how to take it out?  I took off all the bolts and unplugged the alternator but there is not enough space to pull out the alternator. Can you tell me what i need to take out?  It looks impossible.

Answer
GENERATOR - 2.5L
REMOVAL
Disconnect battery negative cable from remote negative terminal on shock tower.
Unplug field circuit from generator.
Remove the B+ terminal nut and wire Wiring Connections - 2.4/2.5L
Loosen top mounting ear bolt.
Loosen pivot bolt, but do not remove. Be careful not to lose nut Generator - 2.5L Engine
Loosen adjusting bolt on idler to allow removal of the generator drive belt. Refer toCooling System.
Remove pivot bolt, do not drop spacer.
Remove top mounting ear bolt.
Remove upper generator bracket.
Remove generator.
INSTALLATION
For installation, reverse above procedures. Tighten all fasteners to the proper torque. Refer to the Torque Specifications chart at the rear Charging.