Chrysler Repair: fitting size for brake bleeder valve, bleeder valve, brake bleeder

Question
what size of a wrench is required to bleed the brakes on a 300M 2001

Answer
Hi Ted,
I suspect you will find a 3/8" box-end wrench is the correct fit. I don't have an '01 car to verify this but when I tried to fit one to my '89 Lebaron that is the size that fit. The size appeared to be somewhere between 8 and 9 mm metric, so those don't work. This must be a fitting that carries over from the "good ole days". I hope this is helpful to you. Let me know if otherwise, thanks.
Roland