Chrysler Repair: 1991 Le Baron Convertible Turn Signals, turn signal switch, turn signals

Question
Hello,

I recently picked up a 1991 Le Baron convertible. I have been having problems with the turn signals. The 4-way flashers work, but the turn signals do not work. I have replaced the yellow flasher unit along with the fuses and relays located along the inner wall underneath the driver's side dash. I replaced the diode package that the turn signal current runs through. The bulbs, sockets, and turn signal switch have been checked (the rear side parking lights do not work for some reason). I am still having problems. So, I went to a Chrysler dealer and asked for some input. He told me that the yellow flasher unit located to the right of the steering column ONLY controls the flashers and NOT the turn signals. I need to look for a separate disc-shaped unit that controls only the turn signals.  Is this true?
If so, do you know where in the car I should be looking for this separate turn signal unit?   If this is not true, what else should I be looking for?  I am not worried about the rear-side parking lights.  I would just like to get my turn signals to work.
Thanks for your help.

Answer
I don't see anyother components than the ones you changed that are involved, Jim. I would check the remote turn signal switch itself at this point: Left should have 2-7 and 2-13 continuity, while Right should have 1-7 and 1-13 continuity. The white 7-way connector next to the 14 way connector must be connect when you perform the test.
Let me know what you find.
Roland