Chrysler Repair: Chrysler signal light flashers in a 1997 ls, chrysler sebring, sebring coupe

Question
My signal lights in my car do not work.  they also don't flash on the dash board. Fine they say i need to change out my signal light flashers but i cannot find the fuse or whatever you call it.  It is a 1997 chrysler sebring ls.
Please help me i need an inspection sticker bad.

Answer
Hi Marvin,
I am working here with the '95 Sebring Coupe/Sedan manual and the '00 manual which both show that fuse #4 (10A) under the dash at the left end is what powers the flasher unit so check that for being blown or having even a subtle crack in the internal conducting wire. The flasher unit itself is shown as being mounted in the center console, near the top, at the level of the heater controls, on the right side inner wall. It may be hidden by the heater module in the console so look behind it if that might be in the way. Let me know if instead you have a convertible which is an entirely different wiring set-up. Also tell me about whether the hazards work.
Roland