Chrysler Repair: 2001Chrysler T/C van ,,,(i.e) Made in Canada, running lights, sound input

Question
Would like some in put ,if anyone could tell me about hooking up a trailer lights,because I have a prob of not gettting the running lights on the same time as the brake lights becaue of the way it was made,,,I been testing the wiring harness in the rear under liftgate where,,I need to somehow jumper over from the running lights to the brake lights,,Im pretty ''a can do with diagrams''but this one has stumped me,,,on the traler I have a brn,,,yellow,,,green,,,white,,,they are hooked up correctly all wire except the,,brn which is throwing me ,because sure ""I can hook it up to the running lights but then I have no brake lights or I can hook it up to where I have brake lights ,but no running lights,,,reolaced the bulbs new, and did a through check of the wiring for maybe a broken wire ,,alls good,,,,,If I had a normal headlight/taillight,,,I wouldve been done with this long ago!!!!  Thanks for any sound input,,,,,   Rick

Answer
this one U will need some sorta adapter from Chrysler for your trailer  go get a wire package from them  there will be a module that comes with the harness. Why u cant get it to work is because the park,turn,and brake lights are all done on the same ckt via hight side drivers from the BCM.