Chrysler Repair: Headlight replacement: Aero-style 93 van, chrysler town and country, finger prints

Question
How do I replace the Headlights on my sons 1993 Chrysler Town and Country ?

Answer
Hi Gary,
I believe you may have the aero-style bulb and housings. In that one it is all done from inside the engine compartment, so open the hood and locate the electrical connector for the bulb on the backside of the housing. There is a release tab on that connector.
Then rotate the retaining ring one-quarter turn counter-clockwise. Then pull the bulb holder and bulb from the housing.
Use a paper towel to hold the new bulb taking it out of its packaging so as not to get any finger prints on the glass. Install the bulb in the holder until it seats. Then reverse the steps above.
The original bulb number was 9004, but that may be out-of-date.
Roland