Chrysler Repair: 94 lebaron: code 32, wd 40, vacuum hose

Question
94 lebaron LE 3L v6  drives & idles fine  when mil lamp lites  still drives fine but misses at idle turning the car off for a few min. all is fine for about 20 miles and mil lamp       mil codes are 12    32    55

Answer
Hi Kent,
I just saw your question in the "pool".
I believe that you have a problem with the egr valve. It is located in the exhaust pipe that crosses from the front manifold to the rear manifold. You will see it has a valve body bolted into that pipe and a round top with a vacuum hose. In between there is a flange and inside the flange is a rod which is the valve stem. Notice that the stem has a slot around the circumference. Take the tip of a screwdriver and insert it in the slot and move the rod back and forth. It should close tightly with the help of an internal spring action. If not, then spray some WD-40 on the stem where it enters the body of the valve, and move the stem some more to free up the action. Thas should fix this, which is what the 32 code is reporting.
The other 2 codes are irrelevant.
Roland