Chrysler Repair: RKE module - Neon 01, remote keyless entry, dodge neon

Question
I need to replace the Remote Keyless Entry module on a Dodge Neon R/T 2001, but I don't know where it is located.

Thanks

Answer
REMOVAL
Disconnect and isolate the battery negative cable.
Remove the instrument panel top cover. (Refer to 23 - BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TOP COVER - REMOVAL).
Remove the two screws holding the RKE module to the instrument panel assembly (RKE MODULE LOCATION).
Slide locking tab of the wiring connector sideways to unlock tab, and remove connector from RKE module.
Remove RKE module from vehicle.
NOTE: When replacing a faulty RKE Module, the replacement module must be configured with the DRB lll® scan tool for proper operation. Additionally, all transmitters must be reprogrammed to the new RKE module.