Chrysler Repair: Changing the Engine air cleaner filter 2005 Pacifica, air filter element, intake air temperature sensor

Question
Hello,
I have always been able to change my air filter in every car I have driven, except this one. How do I remove the old filter and replace it with the new? I don't know how to open the housing. Can you help?

Answer
REMOVAL
Disconnect the intake air temperature sensor (IAT) wiring harness connector.
Disconnect the air inlet tube at the throttle body.
Remove the cover screws
Lift cover and pull toward the engine and remove cover tabs from air box.
Lift cover and remove the element (AIR CLEANER ELEMENT).
INSTALLATION
Install the air filter element into air box (AIR CLEANER ELEMENT).
Move cover so that the tabs insert into the air box.
Seat cover onto element housing and tighten the screws.
Reconnect the air inlet tube and tighten clamp.
Connect the intake air temperature sensor wire harness connector