QuestionI just had a problem with the front passenger side power window. We opened it and now it won't roll up. When we try to close it, it tries to work. I opened the panel and I can see about 3/5" movement from the regulator (up and down). But how can I be sure it's the regulator and not the motor or vice-versa? Do you have the steps to replacing the regulator?
Thanks for your help.
AnswerREMOVAL
Remove the watershield. (Refer to 23 - BODY/DOOR - FRONT/WATERSHIELD - REMOVAL)
Remove door glass retaining clips and secure the window in the up position using masking tape or equivalent(FRONT DOOR GLASS CLIPS).
Disconnect wire connector from power window motor, if equipped.
Loosen screws attaching front and rear window guide rails to inner door panel (FRONT DOOR MANUAL WINDOW REGULATOR - TYPICAL).
Remove screw heads on guide rails from key hole slots in inner door panel.
Loosen screws attaching regulator to inner door panel.
Remove regulator from inner door panel.
Extract rear guide rail through inner door panel rear access hole (FRONT DOOR POWER WINDOW - TYPICAL).
Extract front guide rail through front access hole.
