Chrysler Repair: heater blower motor, negative battery cable, wheel assembly

Question
QUESTION: my question is how do you change the blower motor. How do you remove it from under the dash what has to come off.

ANSWER: kinda hard to answer that question when I dont know what kinda car this is.

---------- FOLLOW-UP ----------

QUESTION: the heater blower motor for a 1999 chrysler 300m

Answer
BLOWER MOTOR AND WHEEL ASSEMBLY
The blower motor is located on the right side of the heater housing. The blower motor and the blower motor wheel must be replaced as an assembly.

REMOVAL
Open hood and disconnect the negative battery cable remote terminal from the remote battery post Negative Battery Cable Remote Terminal
Remove lower right under panel duct.
Remove blower motor connector from resistor block/power module.
Squeeze blower motor wiring grommet and push grommet through blower motor housing cover.
Remove blower motor housing cover.
Remove blower motor retaining screws.
Lower blower motor from housing.
INSTALLATION
For installation, reverse the above procedures.