Chrysler Repair: detecting pump, negative battery cable, chrysler 300 m

Question
where do I locate the leak detecting pump on 2002 chrysler 300 m and is there a manual that would show me where it located

Answer
REMOVAL
Disconnect the negative battery cable.
Remove fuel tank, refer to the Fuel Delivery section for Fuel Tank Removal.
Disconnect the electrical connector from the NVLD assembly.
Disconnect the hoses from the NVLD assembly (Fig. 5).
Lift tab on NVLD assembly (LOCKING TAB) and twist the assembly counterclockwise and pull up to remove from EVAP canister (ASSEMBLY REMOVED).
Remove O-ring from EVAP canister (O-RING).