Chrysler Repair: Horn not working, captive screw, dodge neon

Question
I might have asked you this question earlier. I have a 2002 Dodge Neon. The horn does not work. I've checked all the fuses and the cig lighter works. I can't even find the horn. Where is is located? I thought I would start at the horn and work my way back. Thanks Mike

Answer
REMOVAL
Disconnect and isolate the battery negative cable.
Remove the right side headlamp (Refer to 8 - ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - REMOVAL).
Disconnect the harness connector.
Remove the one screw holding the horn assembly to vehicle (<A href="text>Refer to 8 - ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - REMOVAL).
Disconnect the harness connector.
Remove the one screw holding the horn assembly to vehicle (HORN).
NOTE: The screw holding the horn assembly is a captive screw and will remain as part of the assembly.