Chrysler Repair: 2007 Ram front bumper, grease pencil, nuts and bolts

Question
Hi!
I have an 07 3500 Ram Diesel.  I'm going to replace the front bumper with a winch bumper.  In looking under the wheel wells and hood, there are numerous shrouds and other plastic "things".  Could you give me some basic guideance to remove the entire front bumper?  I'd sure appreciate it!
Thanks!   Chance

Answer
REMOVAL



1. If necessary, remove the charge air cooler, (Refer to 11 - EXHAUST SYSTEM/TURBOCHARGER SYSTEM/CHARGE AIR COOLER AND PLUMBING - REMOVAL) .  
2. Using a grease pencil or equivalent, mark the position of the bumper support bracket (5) on the frame rail tip (7) to aid installation.
3. Disconnect the fog lamp electrical connector at the left frame rail.
4. Support the bumper with a suitable lifting device.
5. Remove the bumper support bracket (5) nuts and bolts (8 and 9) and remove bumper.