Chrysler Repair: change battery 2000 concorde, negative battery cable, bettery

Question
step by step instuctions how to change battery

Answer
Hi Cindy,
Here it is from the '98 manual which no doubt applies to your car:
Turn steering wheel all the way to the right
Verify ignition switch and all accessories are off.
Disconnect and isolate electrically (wrap in plastic) the negative battery cable "remote" terminal from the remote battery post on the strut tower.
Remove air cleaner housing
Remove battery splash shield
Remove two short battery hold down bolts
Slide battery rearward to disconnect the negative and positive battey terminals from the battery
Slide bettery toward rear of vehicle and lift out through wheel well opening

Installation is the reverse.
I hope this is sufficient for your needs.
Roland