Chrysler Repair: Instrument Panel Does Not Light Up, fuel gauge, wire pin

Question
I have a 2001 Sebring 4D LXi and my instrument panel went out the other day.  The other lights such as brake light and check engine light and turn signals all function properly, but the lights that light up the speedometer, temp gauge, fuel gauge, and rpm meter are all off.  I was wondering where I could get a fuse diagram so I can figure out which fuse # those lights are, if they happen to be on a separate fuse. My guess is it is the bulbs or a short, but I am going to replace the fuse first. Any idea what number it is? Thanks.

Brendan.

P.S.  No my lights are just not dimmed. I do not know how many people have asked me that. Too many in fact.

Answer
Thank u so much for tel me what kinda car u have and its a 4 door. I cant count how many times people just ask whats wrong with there car  and dont even tell me what year,engine size or nothing  especially with it comes to wire diagrams. Now for the bad news  your panel lamp are done via the body computer drivers. NO fuse  no outside power source  just right from the body computer.If u want to find out for sure  take out your cluster only one connector that goes to the cluster find the orange wire  pin 12 that will be the panel lamp driver see if u have voltage on that wire when u turn on the lights. If no then u have a bcm issue  if yes  then check for the ground ckt pin 11 black/orange see if there is a ground  and if u have both  u have a cluster issue  I doubt highly that u will burn out 6 bulbs all at once. If not power  then u have a BCM issue. If u live near Atlanta  I would help u out with this.