Chrysler Repair: 95 Cirrus transmission wiring, postal mail, speed sensors

Question
I replaced the transmission in my 95 cirrus. The old one had two sensors with 3 wires to each one that screwed into the tranny, but the new one has a plug in sensor with 8 wires going to it. Before I start splicing together the 2 wiring harness i have to make one that works, can u tell me where to find any free diagrams on the wiring for this year car? Any help would be very greatly appreciated.Thank you

Answer
Hi Sean,
I don't understand your situation. I know about the two sensors with TWO wires each (input turbine and output speed sensors). But I don't know what you mean by a "plug-in sensor with 8 wires". Is this one sensor supposed to replace the other two? What year vehicle is the replacement trans taken from and is it also from the Cirrus line of powertrains? I have the '96 Cirrus shop manual so I do know the wiring for your car, probably, but I have to know more about the replacement trans to see if I have any data about it. One hope is that the wire color codes may be identical because Chrysler engineers are fairly good about being consistent, so you may try to see if there is any agreement between what you had and what you have now. So please clarify. I can xerox copy the diagrams for the '96 trans and postal mail them to you. If you would be kind enough to send me back stamps covering my costs to copy which are 8 cents per side plus the postage. But you also need to know how the replacement trans is supposed to be wired.
Roland