Chrysler Repair: Map Sensor, intake pipes, wire connector

Question
Where on the engine is the "Map Sensor" located on a 1995 Chrysler 3.8, V-6 Town & Contry Van.

Answer
If you look on the underhood sticker, that drawing may also show its location.



The MAP sensor is located on the side of the intake manifold (plenum) at the end closest to the throttle body. It senses the pressure level in the manifold. It is very close to the first pair of intake pipes on the driver's side. It has a three-wire connector (colors:black/light blue, dark green/red, violet white). It is held in place on the plenum by a couple of bolts and is dark in color. It should be readily visible while viewing the top of the engine.
Roland