Chrysler Repair: 1990 Labaron Convertible, close loop, resevoir

Question
I have a 1990 Labaron Convertibl;e, lately I noticed that the right side cylinder, is lowering the top, but the left side goes halfway down. I refilled the resevoir with fluid, but did not bleed the lines. My question is there an easy way to bleed the lines, or can I repair the left cylinder?  thanks Joe  

Answer
Hi Joe,
The convertible hydraulics are not my strength, but from what I know there is no issue about bleeding the lines, they should do so themselves with the close-loop pump around function. You might want to check that the by-pass valve is closed tight. Otherwise, I suspect the cylinders can be replaced individually but I don't know about servicing them. You might try asking at one of the Yahoo Group sites, there are two of them: "ChryslerLebaron" and "TheChryslerLeBaronClub" in the url: http://autos.groups.yahoo.com/group/     and then fill in the rest with either of those two names as shown.
Roland