Chrysler Repair: 96 chrysler cirrus lx 2.5 v6 not firing, camshaft position sensor, hair cracks

Question
dies here and there now it won't start turns over normal It just doesn't have any spark replaced cap and rotor hear rumor that cms could be cause?had a diagnosis done a week ago then had computer reflashed They told me it just had a tune up rotor cap was burned pretty good. distribitor cap looked slightly hair cracks on inside. also a loose bolt on intake by the fire wall.How do i check cms camshaft position sensor or could it be something else? on the driver sun advisor 3 little buttons and red light when buttons are pushed.when I shut the car off last time head lights were left on then key off then head lights turned off but they stayed on few minutes then when off. I was seeing what purpose was for.thought was for someone to be able to see walk way after dark then switch them off by a timer? thank you I'm new and frustrated to these computerized cars.  

Answer
You have to have the tools for the job !!The only way to see
why that coil has no "fire" is to scan the engine computer
.the scan tool tells the tech. what is working and what is not,It will also tell the tech.what went wrong the last time
the engine was running.Or you could do it the "FORD" way
"replace with a known good part" Good-day.tm