Classic/Antique Car Repair: 1967 GTO convertible top, cro bar, phillips head

Question
Hi,
  Does anyone know what the measurments are for the convertible top of a 1967 Pontiac GTO. I have a top and do not know for sure what it is for, but I suspect a 67 GTO.
Thanks,
Dennis

Answer
Dennis;
I would try a shop that does that type of work.
Hea- you ask me a question that in no way I can answer, what size is it, how thick, zipper or snaps length and with so how in the hell is it that I should know this answer, I have a chicken with a egg can you tell me if it is going to be a male or female. ? you ask me something I can not answer than you give me a #1 , gee thanks do not ask me any more if you have such stupid questions. . I got a 327 cu.in. with a 4bbl and a cam, how much horse power do I have ? or I have a flat tire, do you think if I turn it up side down the flat will only be on the top? do you understand what you had asked me than gave me a crapey rating- thanks for nutting.I wonder what is in your tool box, a hammer, vice grips, plyers,screwdriver,Phillips head, a pry bar, a pipe, and a cro-bar,  that a good over haul set for the beginner. , so please if you wish to ask me a question that makes any sense please do so, but with those questions like - if I put more air in my tires will I go faster or if I go 50 miles a hour and throw it into reverse is it ok that I can leave a 50 foot patch of rubber. do you understand some of the lame questions that I get, I must know the whole story behind it. not just 1.4 of it. ok pal. ALSO IN no way shape or form do I mean to pick on you or to make fun of you, I just wish for you to understand what I get and how do I answer questions like that ,etc.  ok and Merry Christmas to you and yours......>>>>,