Dodge Repair: sensor crank shaft position: 5.7L

Question
Hello my car is a Dodge Charger 2006 5. 7  I would like to know the location of the sensor in my car please

Answer
Hi Juan,
It is located on the right side of the engine block at the rear of the engine (near the starter motor). It is held by one bolt. Remove the plug, remove the bolt, then gently rock it out of the socket. When installing similarly rock it gently until flush with the surface of the block. Tighten the bolt to 9 foot-pounds of torque.
The plug's wire colors are dark blue/white, dark blue/dark green, and pink/yellow.
Please read the PS (below), and be sure to answer "yes" to the question about nominating me to be "volunteer of the month".
Thank you very much, Juan.
Roland