Dodge Repair: window regulator, dodge ram 1500, water dam

Question
I have a 99 dodge ram 1500 the window is stuck in the up position and I need to know how to remove the motor and regulator assembly.

Answer
Replacing the window regulator is not an easy task but I will include the service procedure for it. To possibly free the window from its current position you should try banging on the regulator motor while holding the window switch in the down position.

FRONT DOOR WINDOW REGULATOR
REMOVAL
Remove door trim panel.
Remove water dam.
Remove nuts attaching door glass to window regulator.
Remove glass from door or move glass to full up position and secure glass to door with tape.
Disengage power window motor wire connector from door harness, if equipped.
Remove bolts attaching window regulator to inner door panel.
Separate window regulator from door panel Door Glass Window Regulator
Extract window regulator through access hole in inner door panel
INSTALLATION
Position window regulator in door through access hole.
Install bolts attaching window regulator to inner door panel.
Engage power window motor wire connector to door harness, if equipped.
Install glass in lift plate.
Install water dam.
Install door trim panel

There are no pictures available for this procedure but the description should be clear enough.