Dodge Repair: Crankshaft sensor, crankshaft position sensor, negative battery cable

Question
Im trying to replace the crankshaft sensor on a 2003 dodge neon r/t 2.0.
I already took off the oil pan and all the bolts from the main bearing. My
question is how do i pull off the main bearing in order to take off
crankshft sensor?

Answer
who told U that u had to remove the oil pan and bed plate for the crank sensor?

REMOVAL - 2.0, 2.4, 2.4L TURBO
The Crankshaft Position Sensor is in the front of the engine block just under the starter motor (CRANKSHAFT POSITION SENSOR LOCATION).

Disconnect the negative battery cable.
Raise vehicle and support.
On 2.4L SRT-4 remove the lower inner cooler hose from the metal tube.
Remove the Structural Collar (Structural Collar and Bending Strut—(Automatic Transaxle Equipped) ), refer to the Engine, Structural Collar Removal and Installation section.
Unlock and disconnect the electrical connector to the crankshaft position sensor.
Remove the crankshaft position sensor bolt.
Remove the sensor (CRANKSHAFT POSITION SENSOR - 2.4 L TURBO).