Dodge Repair: where is the pcv valve located, 2005 dodge durango, dodge durango

Question
Where is the pcv valve located on a 2005 dodge durango 5.7 hemi?  I was told it was under the hemi cover.  If it is how do I remove the hemi cover?
Thanks!

Answer
3.7L V-6 / 4.7L V-8
The PCV valve is located on the oil filler tube (PCV VALVE/OIL FILLER TUBE LOCATION - 4.7L V-8). Two locating tabs are located on the side of the valve (PCV VALVE/OIL FILLER TUBE LOCATION - 4.7L V-8). These 2 tabs fit into a cam lock in the oil filler tube. An O-ring seals the valve to the filler tube.




1 - O-RING  
2 - LOCATING TABS  
3 - CAM LOCK  
4 - OIL FILLER TUBE  
5 - PCV LINE/HOSE  
6 - PCV VALVE  


Disconnect PCV line/hose (PCV VALVE/OIL FILLER TUBE LOCATION - 4.7L V-8) by disconnecting rubber hose at PCV valve fitting.
Remove PCV valve at oil filler tube by rotating PCV valve downward (counter-clockwise) until locating tabs have been freed at cam lock (PCV VALVE/OIL FILLER TUBE LOCATION - 4.7L V-8). After tabs have cleared, pull valve straight out from filler tube. To prevent damage to PCV valve locating tabs, valve must be pointed downward for removal. Do not force valve from oil filler tube.
After valve is removed, check condition of valve O-ring (PCV VALVE/OIL FILLER TUBE LOCATION - 4.7L V-8).