Dodge Repair: 3rd row seatbelt, dodge grand caravan, anchor bolt

Question
QUESTION: Need help removing passenger side 3rd row seatbelt on 2006 Dodge Grand Caravan with rear AC.

ANSWER: what help do u need? just remove the bolts.

---------- FOLLOW-UP ----------

QUESTION: I need to remove the entire retracting unit

Answer
REMOVAL
1. Remove first and second row seats.
2. Remove first row seat belt lower anchor bolt.
3. Remove first row seat belt upper anchor bolt.
4. Remove liftgate sill plate.
5. Remove upper liftgate trim.
6. Remove second seat belt lower anchor bolt.
7. Remove second seat belt upper anchor bolt.
8. Remove D-pillar trim cover.
9. Disconnect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in the rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
10. Remove quarter trim bolster.
11. Remove quarter trim panel screws.
12. Remove quarter trim panel.

13. Loosen HVAC unit enough to gain access to seat belt retractor fasteners. a. Remove bracket around HVAC unit Fig. 1 .
b. Remove air duct Fig. 2 .
c. Remove fasteners attaching HVAC unit to inner quarter panel Fig. 3 .
d. Gently pry out on rear HVAC unit to gain access to the seat belt and retractor.