Dodge Repair: Dodge Nitro multifunction switch, 2007 dodge nitro, slide tabs

Question
Is it the same procedure to replace a multifunction switch in a Dodge Ram, and what is the part no. for a 2007 Dodge Nitro SUV.

Answer
2. Remove both the upper and lower shrouds from the steering column. (Refer to 19 - Steering/Column - Removal) .
3. Remove the screw (2) that secures the right multi-function switch (1) to the mounting bracket integral to the right side of the clockspring (3) on the steering column.
4. Slide the switch away from the clockspring far enough to disengage the slide tabs on the switch housing from the channel formations in the mounting bracket.



 
5. Disconnect the jumper wire harness connector (1) from the connector receptacle on the inboard end of the right multi-function switch (2).
6. Remove the switch from the clockspring (3).