QuestionQUESTION: What could be wrong. My rear unit does not blow hot air only cold, but the front unit works fine. is it a fuse or something more costly? Does it have anything to do with my front driver seat heater not working?
ANSWER: could be a clog in the rear heater core or the bled door or motor is not working right.
---------- FOLLOW-UP ----------
QUESTION: HWere is the rear heater core located and where is the bled door or motor located?
AnswerREMOVAL
Tumble 2nd row seats to cargo position.
Remove 3rd row seat, if equipped. (Refer to 23 - BODY/SEATS/3RD ROW SEAT - REMOVAL)
Remove C-pillar trim. (Refer to 23 - BODY/INTERIOR/C-PILLAR TRIM - REMOVAL)
Remove D-pillar trim. (Refer to 23 - BODY/INTERIOR/D-PILLAR TRIM - REMOVAL)
Remove liftgate opening scuff pad. (Refer to 23 - BODY/INTERIOR/LIFTGATE SCUFF PLATE - REMOVAL)
Remove screws attaching quarter panel trim to C-pillar and D-pillar.
Route 2nd row seat belt through access slot in quarter panel trim.
Grasp quarter panel trim and pull outward to disengage spring clips.
Separate quarter panel trim from vehicle.
