Dodge Repair: Steering stabilizer, dodge ram 1500, bar clamps

Question
What tools will i need and how do i install a steering stabilizer in my 1997 dodge ram 1500 4x4?

Answer
Me personally never dons this repair so I wont know what tolls U will need.

STABILIZER BAR
REMOVAL
Raise and support the vehicle.
Disconnect the link from lower suspension arm and stabilizer bar STABILIZER BAR
Disconnect the stabilizer bar clamps from the frame rails. Remove the stabilizer bar.
INSTALLATION
Position the stabilizer bar on the frame rail and install the clamps and bolts. Ensure the bar is centered with equal spacing on both sides. Tighten the bolts to 54 N·m (40 ft. lbs.)
Install links on stabilizer bar and lower suspension arm. Install grommets, retainers and nuts. Tighten nuts to 34 N·m (25 ft. lbs.)
Remove the supports and lower the vehicle.