QuestionI have a 2005 Ram 2500 with Infinity sound system. I am having a lot of annoying vibrations from the door panels when the radio is turned up. There is a service bulletin explaining to install felt tape along the panels to eliminate the vibration. Just not sure how to remove the panels.
AnswerREMOVAL
Remove the screw (1) that secures the interior door handle (2) to the interior door handle actuator (3).
Remove the interior door handle from the interior door handle actuator.
If equipped, remove the manual window crank (1) using a window crank removal tool (2).
Remove the two screws (2) that secure the door trim panel (3) to the two screw inserts (1).
Remove the two screws (4) that secure the door trim panel to the bottom of the door.
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not pull the door trim panel directly off of the door or damage to the trim panel and/or the power switch assembly will occur.
Lift the door trim panel straight upward to disconnect the molded plastic retaining clips (5) from the door.
If equipped, disconnect the door wire harness from the power door switch assembly and remove the door trim panel.
