Dodge Repair: 98 Intrepid Headlight Replacement, signal lamps, hood latch

Question
How do I change the drivers side low beam bulb on my 98 Intrepid, and which screws do I remove. I don't want to disassemble anymore than I need to. Any tips would be appreciated. Thanks!

Answer
HEADLAMP HOUSING - INTREPID
Headlamp lens fogging is a normal condition and does not require service. Moisture will vent from tubes or vents located on the back of the lamp.

REMOVAL
Release hood latch and open hood.
Remove jackscrews attaching headlamp to body Headlamp Housing
Remove headlamp from body.
Disconnect wire connector from headlamp and parking, side marker, and turn signal lamps.
Remove headlamp housing from vehicle
INSTALLATION
Place headlamp housing in position on vehicle.
Connect wire connector to headlamp, parking, side marker, and turn signal lamps.
Place headlamp lamp in position on body.
Install screws to attach headlamp to body.
Verify headlamp operation and alignment.