Dodge Repair: 2004 dodge ram 2500 wiper assembly, dodge ram 2500, pivot brackets

Question
the passenger side wiper stopped working I think the linkage cam apart how do I get to it to put it back together

Answer
REMOVAL
Remove both wiper arms from the wiper pivots. (Refer to 8 - ELECTRICAL/WIPERS/WASHERS/WIPER ARM - REMOVAL).
Unlatch and open the hood.
Disconnect and isolate the battery negative cable.
Remove the cowl plenum cover/grille panel from over the cowl plenum. (Refer to 23 - BODY/EXTERIOR/COWL GRILLE - REMOVAL).
Disconnect the left headlamp and dash wire harness connector for the wiper motor from the motor pigtail wire connector (Wiper Module Remove/Install).
Remove the two screws that secure the wiper module to the top of the cowl plenum panel at the pivot brackets.
Remove the two screws that secure the wiper module to the bottom of the cowl plenum panel.
Remove the wiper module from the cowl plenum panel as a unit.