Dodge Repair: 2000 DODGE INTREPID HEATER CONTROL PANEL, negative battery cable, 2000 dodge intrepid

Question
THE LIGHTS FOR THE HEATER WENT OUT AND NOW YOU CAN'T TELL WHAT TEMP IT IS SET ON ON ANYTHING ELSE. HOW DO YOU REPLACE THIS UNIT.

Answer
HEATER - A/C CONTROLS
REMOVAL
Open hood and disconnect the negative battery cable remote terminal from the remote battery post Negative Battery Cable Remote Terminal
Remove the ash receiver assembly, if necessary.
Remove the instrument panel center trim bezel and remove the two electrical connectors from the back of the control head and traction control switch (if equipped) Instrument Panel Center Trim Panel Removal and Heater - A/C Control Head Removal
From the back of the center trim bezel, remove the six retaining screws from the heater - a/c control head and remove from the bezel.
INSTALLATION
For installation, reverse the above procedures.