QuestionQUESTION: hello, my question is, if i change the input and output sensors on a 2000 dodge caravan tranny do i have to do a transaxle quick learn for the tranny to come out of limp mode? also if i change the tcm do have to do the quick learn? and last how long does it take the garage to preform the quick learn and how much should it cost? thank you for your help it makes me feel better to get a little knowledge, the dodge dealership here does not have a good reputation with service.
ANSWER: part one no part2 yes parts 3 no idea depends on who's doing it and cost i cant tell u either will depend on where u live in the world. Bring it to me =) Why do u need a TCM ne way?
---------- FOLLOW-UP ----------
QUESTION: i would bring it to you but i live in upstate new york. I took it to the dealership to have the computer read when it went into limp mode, they said the tcm was bad and needed to be replaced. is this not normal? thank you for your help.
ANSWER: did they give u the code was it a p0601 ???
---------- FOLLOW-UP ----------
QUESTION: hello, they gave me a code of p0700 and p0740 does this help?
AnswerP0740-TORQUE CONVERTER CLUTCH CONTROL CIRCUIT
I doubt its a TCM here is a list of possible causes for that code.
CHECKING SYMPTOMS AND POSSIBLE CAUSES
LOW BATTERY VOLTAGE CAUSING SYMPTOM
CODE P1784 ALSO PRESENT
NO PEMCC TO FEMCC TRANSITION DURING TIP IN
OIL PUMP BUSHING LOW PRESSURE
SOLENOID PACK ASSEMBLY L-R SOLENOID OPEN
VALVE BODY VALVE MECHANISM
INTERMITTENT CODE P0740
I would take it to some place that knows what they are doing the people u have it at are guessing.
