Dodge Repair: 1998 Dodge Dakota Window Regulator, water dam, dodge dakota

Question
I am looking for simple instructions for replacing a window regulator in my 1998 Dodge Dakota.  I could not find anything online or in the the repair manual.  Is it a really hard job that a rookie should not be doing?  I need both sides replaced and the dealer is way too expensive.  thanks in advance.

Answer
I live in Atlanta if u need it done for ya.
FRONT DOOR WINDOW REGULATOR
REMOVAL
Remove door trim panel.
Remove water dam as necessary to access window regulator.
Remove glass from door.
Disengage power window motor wire connector from door harness, if equipped Power Regulator
Loosen bolts in slotted holes attaching regulator to door inner panel Power Regulator Bolts
Remove bolts attaching window regulator to inner door panel.
Extract window regulator through access hole in inner door panel.
Separate window regulator from door panel.
INSTALLATION
Position regulator in door and align bolts with slotted holes in door inner panel.
Install bolts attaching window regulator to inner door panel.
Engage power window motor wire connector to door harness, if equipped.
Install glass in door.
Install outer belt weatherstrip.
Install inner belt weatherstrip.
Install water dam.
Install door trim panel.
Verify operation.