Ford Repair: 2001 Taurus Brakes, wheel cylinders, brake shoes

Question
Started out with replacing both wheel cylinders and brake shoes and hardware on rear...This was fine for few days then started blowing out wheel cylinders and inside hardware so have replaced everything again including the master cylinder and still no brakes ...you can pump them and it works for a minute then loses all presure ....have bleed all brakes several times bench bleed the master cylinder as well still no presure...any ideas would be greatly appreciated thank you in advance...Mike

Answer
Hi Michael,
You have a serious problem. Please take it to your FORD dealer and have them give you an estimate for repairs. Don't let an after-market mechanic try and fix this. If you have ABS, it could be an ABS problem. GOOD LUCK!!
Jeff
AllExperts