Ford Repair: brake lights not working, turn signal switch, light bulbs

Question
i have a 93 ford ranger its a v-6 4.0 4x4. the lights work and i have tried swithching the break light switch. i have replaced all the light bulbs. all the fuses are good. i cannot figure out what else could be wrong. any suggestions???

Answer
more than likely a turn signal switch if all bulbs and fuses ok-most people don't realize the brake lights are fed through a circuit from  the turn signal switch-if you have a tilt wheel be sure and check wires going to switch and make sure they are not pulled out of connector. the turn signals and all other lights would work as normal-good luck.