Ford Repair: Air Intake Cover Removal, cowl vent, ford taurus

Question
-------------------------
Followup To
Question -
How do I remove the air intake unit on a Ford Taurus 1998 to replace plugs and wires and EGR valve pressure sensor?
Answer -
Hello and thanks for the question...I'll try to help.
More info needed.....engine size, transmission, AC or not.
Erik
Thanks for the reply, here is the information,
V6 DOHC; automatic transmission, with AC.
Neal

Answer
Hello and thanks for the reply...I'll try to help.

Disconnect the battery ground cable.
Remove the RH side of the cowl vent screen, and cowl top extension.
Disconnect engine control sensor wiring tram the ignition coil. Remove the four ignition coil hold-down screws, and remove the ignition coil to access the spark plugs on cylinders 1, 2, and 3.
Disconnect the electric IMRC actuator electrical connector. Remove the mounting screws, and lay the IMRC actuator aside to access the spark plugs on cylinders 4, 5, and 6.
Disconnect ignition wires from spark plugs.
Loosen spark plugs 1/4 turn. Using compressed air, remove any dirt or foreign material from spark plug areas at valve cover.

Hope this helps,
Erik