Ford Repair: 1999 Ford Contour SE, blower motor resistor, ford contour

Question
My A/C blower switch (fan switch on dash) has stopped working in any setting EXCEPT High. Any suggestions?

Answer
Hello and thanks for the question...I'll try to help.
It sounds like the blower motor resistor is shot. To replace/check it follow these steps:
1 Unclip the upper footwell trim panel on the passenger side and remove it.

2 Disconnect the blower motor resistor electrical connector.

3 Remove the blower motor resistor screw and the resistor.

Hope this helps,
Erik