Ford Repair: Ford Probe 1993 Se, fuse size, fog lights

Question
I just bought a 1993 ford Probe SE, it has fog lights that do not work. I have tried plugging in the right fuse for it but it still does not work. But that is the least of my problems, the car after a month of driving it starts to shake when I hit around 50kms. I know I have to change my rotors which is one of the reasons the car shakes. But this shake is different from tire shakes, the whole car shakes its really different from just rotos being faulty. Anyways I have no idea what it is, I heard it could be my transmission from several other sites. Rather than that I have no idea, my car also sometimes does not start. Help? Thanks for your time

Answer
Hello and thanks for the question... I'll try to help.
 Let's go one step at a time here. Fog lights. Are they factory installed ones or after market?
For factory installed ones (use this link):

http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1...

There also MIGHT be more then one fuse for them, check with the owners manual for location and fuse size.

Ok, vehicle shakes? This is NOT caused by the rotors, unless you are talking that it's shaking when the brake is applied. What I would suggest is that you take a seriously close look at the front end of the vehicle, and the tires on the vehicle. Make sure everything is tight, and that the tires do not have any broken belts and are properly balanced.
As far as the intermittent no start. Check to make sure that the battery terminals are good, clean and tight. Also, notice that your transmission is fully in Park, when this happens.
I hope this helps,
Erik