Honda Repair: 93 Honda Civic 1.5 L engine, pulley bolt, crank shaft

Question
crank shaft pulley bolt stuck in the crank shaft, which direction are the threads?  are they left hand or right hand threads?

Answer
 Well the pulley is bolted on to the crank shaft it loosens just like any other bolt counter clock wise or well to the left. You will need a chain wrench to hold the pulley in place then use a breaker bar to loosen the bolt. Remove the bolt then renistall in a few threads take two big screw drivers and wiggle the pulley off the shaft. Or you can just use a three jaw puller and, make sure you line up your timing mark before all this.