Hyundai Repair: 04 Elantra Rotor removal issues, heavy hammer, liquid wrench

Question
I have removed one of the two rotors without much issue. The other refuses to budge. I have used a can of liquid wrench, beat it with a sledge (for an hour) and heated the rotor with a torch. Will a puller work on this? Any other magic? I previously did an 03 and was able to beat them off.
Thank you.

Answer
Hello Gerry,
If you are sure you removed every bolt that holds it then only thing that left is using a puller. I never had a rotor that is stubborn that much.Sometimes they get stuck but using a little bit of WD40 and a heavy hammer should take care of it.