Hyundai Repair: 95 accent rotor removal, wheel hub, hub puller

Question
95 accent, removal of the front rotor.  

Answer
This rotor is behind the wheel hub, so you'll need to remove the wheel hub to replace it.

1.  Jack the front wheel in question and support the vehicle with a jack stand.
2.  Remove the wheel.
3.  Remove the caliper.
4.  Remove the axle nut.
5.  Using a hub puller or slide hammer, remove the wheel hub.
6.  Unbolt the rotor from the hub and remove.
7.  Install the new rotor on the hub.
8.  Install the hub on the vehicle using the axle nut (without washer) to draw it down.
9.  Remove the axle nut, install washer, and reinstall.
10.  Install a cotter pin in the axle nut.
11.  Install the caliper.
12.  Install the wheel.
13.  Lower the vehicle.