Hyundai Repair: routing for serpentine belt, crank pulley, adobe svg viewer

Question
Hi and thanks so much for teaching us how to change a timing belt.It was perfect directions,but now I can't get the serpentine belt back on right.I have signed up for a free account on hmaservice so I could get a diagram but it will not process.It is a 1999 sonata,6 cylinder,2.5 engine.Please help.Thank you

Answer
If you're having trouble with the account, try using the lost password feature.  Some people that reported problems getting a password have gotten theirs that way.

If you're having trouble seeing the pictures, check the site requirements section.  You may need to download the Adobe SVG Viewer.

You can (hopefully) view the diagram using the following path:
Engine Mechanical --> Cooling System --> Accessory Drive Belts --> TENSION ADJUSTMENT (2nd link).

In the event you cannot get to the diagram, this is my best attempt to make it clear:

First, the belt goes behind the tensioner.  If you've got the tensioner on and the belt off, you'll need to take the tensioner off, slip the belt around the pulley, and bolt it back on.

Going clockwise from the power steering pump, the belt goes to the left of the idler pulley, then over and around the right side of the a/c pulley, around the left side of the crank pulley, to the right of the tensioner pulley, and down to the alternator.