Isuzu Repair: 1992 Isuzu W7000 Truck, bleeding brakes, necessary brake

Question
How do you bleed the air out of the hydralic clutch slave and hydralic master cylinder?

Answer
hello dereck. well, there are a couple different ways to handle it. You can have an assistant, which is helpful in bleeding brakes and your slave cylinder. Or you can go to an auto parts store, i prefer NAPA and go get a brake bleeder tool for very little money. To start, loosen one of the brake lines until brake fluid starts to come out, I usually use one of the rear brake lines. have an assistant depress the pedal until you see a solid line of brake fluid come out and no air bubbles, air causes a spongey pedal and bent fenders if you know what i mean! make sure no air enters the brake system, do this process two or three pedal squeezes and then tighten the screw and add necessary brake fluid. the slave cylinder is quite similar. Oh, and make sure to give the pedal a few pumps to repessurize the sytem before any driving or you will be asking for body repair advice next!lol. any more questions you have i am here for ya!.