Jeep Repair: PT Cruiser 2005, splash shield, headlight assembly

Question
How do I change out the headlight assembly on a PT Cruiser 2005?

Answer
REMOVAL
Raise vehicle on a hoist.
Remove wheel and tire.
Remove splash shield as necessary to access headlamp housing.
Remove grille.
Remove the two fascia bolts from behind the grille (FASCIA CENTER ATTACHING POINT) and (LOOSENING THE FASCIA).
Remove fasteners attaching fender to fascia on the side being worked on.
Remove the three fasteners holding the lower fascia to the lower radiator crossmember.
Remove four nuts attaching headlamp housing (HEADLAMP UNIT HOUSING).
Remove headlamp housing by lowering the fascia as necessary (HEADLAMP UNIT REMOVAL) and (HEADLAMP UNIT REMOVAL).
Disconnect wire connector.