Jeep Repair: hub assembly replacement 1999 jeep sport, spindle nuts, cotter pin

Question
I am replacing the hubs on my 1999 cherokee sport.  The hubs come with a warning to be sure and torque the spindle nuts to the proper specs.  What should the nuts to torqued to?
Thanks.

Answer
INSTALLATION
Install the hub bearing and brake dust shield to the knuckle.
Install the hub bearing to knuckle bolts and tighten to 102 N·m (75 ft. lbs.)
Install the hub washer and nut. Tighten the hub nut to 237 N·m (175 ft. lbs.) Install the nut retainer and a new cotter pin.
Install the brake rotor, caliper and ABS wheel speed sensor, Refer torakes.
Install the wheel and tire assembly.
Remove support and lower the vehicle.