Jeep Repair: Jeep ignition switch removal, jeep ignition switch, negative battery cable

Question
Hi!  I want to replace the key switch on a '97 wrangler with manual tranny.  I can't find the release pin to get the key switch out.  Help?
Steve

Answer
GNITION SWITCH AND KEY CYLINDER
The ignition key must be in the key cylinder for cylinder removal. The key cylinder must be removed first before removing ignition switch.

KEY CYLINDER REMOVAL
Disconnect negative battery cable at battery.
If equipped with an automatic transmission, place shifter in PARK position.
Rotate key to ON position.
A release tang is located on bottom of key cylinder Key Cylinder Release Tang
Position a small screwdriver or pin punch into tang access hole on bottom of steering column lower cover Key Cylinder and Cover Removal
Push the pin punch up while pulling key cylinder from steering column.
IGNITION SWITCH REMOVAL