Jeep Repair: Dead battery after 2-3 days, jeep grand cherokee, amp meter

Question
97 Jeep Grand Cherokee. Troubleshooting indicates BCM and door modules are not going into sleep mode. Measure battery current about 200 mA.  Drops to 100 mA if I pull circuit breaker for door modules.  Swapped out BCM.  Yes, it won't start but all timer controls work perfectly.  I see same current draw problem.  Inspected door modules.  No obvious wire or  connector problem.  It starts OK if I put original BCM back in. It had same problem when I bought it in 2001 from private lot.  They replaced BCM and work great.  First noticed problem again this summer. Please advise.  Thanks.

Answer
pull fuses one at a time when u are measuring the amps  u will need to remember this  when u have the amp meter setup wait 5 min b4 looking at the reading  the 200 will be there until the computers do go to sleep  the max amp draw u want to have will not be over 35ma